PHENALKAMINE EPOXY HARDNER

PHENALKAMINE EPOXY HARDNER


Specially for

  •   Marine Paints
  •   Tank Coating
  •   Large Pipe Coating
  •   Floor coating

  Construction Chemicals.

Adarsh Industrial Chemical has emerged in the production of our New Product Phenalkamine Hardeners. The distinctive qualities of these hardeners have complemented the technical abilities of the organization and its management in achieving rapid growth in the industry. Phenalkamine Hardeners are unique hardeners with inherent property to cure epoxy resins at low temperatures down to 0°C under high humidity with surface tolerance and adequate flexibility. As a result, Phenalkamine Hardeners have an edge over both polyamides and polyamines in the field of mainly Marine & Protective Epoxy Coatings.

We have developed three products of Phenalkamine hardener AI 1040, AI 1041 and AI 1041LV

PHENALKAMINE EPOXY HARDNER

marine industry

Epoxy-hardner

 

Grade : AI 1040 PHENALKAMINE

Colour 17 max
Viscosity at 25°C 1500-2300 mPa
Density at 25°C 0.98-1.3 kg/l
Amine value 510-545mg/KOH/gm
Non volatilities Less than 5%
Gel time 40-50 min
Visual Appearance Clear reddish brown liquid
Solid (%) 100, Solvent Free
A.H.E.W 81
Features Low viscosity, Surface tolerant, Solvent free, Good chemical Resistance

High Solid coatings, concrete coatings, Portable water pipe lines.

 

 

Grade : AI 1041 PHENALKAMINE

Colour 17 max
Viscosity at 25°C 20000-50000 mPa
Density at 25°C 0.98-1.0 kg/l
Amine value 290-325 mg/KOH/gm
Non volatilities Less than 1%
Gel time 35-85 min
Visual Appearance Clear reddish brown liquid
Solid (%) 100, Solvent free
A.H.E.W 130
Features Excellent anticorrosion, Low temperature cure, Surface tolerant.

Portable water tank coatings, ballast tank coatings, Medium to high solids marine & Industrial maintenance coatings.

 

 

Grade : AI 1041LV PHENALKAMINE

Colour 15 max
Viscosity at 25°C 2300-2500 CPs
Amine value 320-340 mg/KOH/gm
Gel time  
Visual Appearance Reddish brown
Solid (%) 100, Solvent free
A.H.E.W 125
Features Low viscosity for  high solids

 

STORAGE AND HANDLING

Material should be stored indoors in the original, unopened and undamaged containers in a dry place at storage temperatures between 5°C and 30°C. Exposure to direct sunlight be avoided.

 Shelf life

If stored in accordance with the guidelines provided this grade has a minimum shelf life of 8 months. If material is held beyond this period of time it should be evaluated to confirm that it remains suitable.

PACKAGING

1, 5, 25, 200 Kgs Packing in Containers

Advantages: 

  • room temperature and low temperature cure
  • moisture resistance during cure
  • excellent chemical resistance, especially acids and alkalis
  • excellent water/salt water resistance
  • good flexibility
  • low toxicity
  • non-critical mix ratios